AMDA HOME
Machinery
Specials
Member
Terms & Definitions
MembersJoin AMDA

This machine available from Westbrook Engineering
Contact or Phone: Toll Free (800) 899-8182 Local (586) 759-3100
about this machinery item -- or any other machine you need.
www.westbrook-eng.com


Tenka 3-Axis Vertical Machining Center TK 426/3-3 ONE - USED TEKNA 3-Axis Vertical Machining Center
Model TK 426/3-3  ◊  SN-315  ◊  YEAR: 2006  ◊  Stock No. 10006

For milling, drilling and tapping of aluminum, mild steel, stainless steel, composite and PVC work pieces

Machine specifications & accessories:
◊ Standard machine axis drive capacities (machinable dimensions): X: 126"; Y: 11.8"; Z: 8.6"
◊ Machinable capacity in Y with angle head and 1.5” tool projection: working top and one side of profile: 7.5"; working top and 2 sides of profile: 3.6"
◊ Extra long machining capability; profiles longer than 126" can be machined by X axial repositioning; max. 252" programmed length; unlimited physical length
◊ Speeds: spindle motor: 500-18,000 rpm; rapid positioning feed rate for X-axis: up to 2,952"/min.; Y & Z axes: up to 1,102"/min.
◊ Linear repeatability: +/- 0.0039"
◊ Electro-welded frame
◊ Cast bridge gantry; double column
◊ Electrical: 480V; 3 phase; 60Hz; 30 amp
◊ Pneumatic: 100-110 PSI; 3.5 ft3/min. average consumption
◊ PC Based Control: 1.0 GHz Pentium® CPU, Includes 3.5" floppy drive, 20Gb hard disk, 15" color LCD monitor, retractable keyboard, mouse, Ethernet card, Microsoft Windows® XP.

Controls Software:
  ◊ Windows® XP (on machine)
  ◊ CN6W (NC software on machine)
  ◊ ISO (G code) language editor and compiler (on machine)
  ◊ Self Learning Software with extended macros library (conversational graphical user programming interface; on machine)

◊ Spindle motor: Four pole, 7.4 Hp, 500-18,000 RPM, air cooled, ISO 30, automatic tool changer
◊ (1) fixed tool magazine; 3 tool places plus 1 angle head place
◊ (2) additional tool magazines mounted on the gantry; 8 tool places
◊ (1) angle head for side machinings (milling)
◊ (8) ISO 30 tool holders
◊ Tool sensor for automatically measuring tool lengths
◊ (2) manually retractable zero-point stops (for extra long machinings)
◊ Venturi fed minimal coolant system with 3 spray nozzles (1 gallon cap.)
◊ Safety devices: photocells (light curtain) on front
◊ (5) adjustable pneumatic vice clamps

TERMS : Check with order
F.O.B. : Warren, MI

contact Westbrook Engineering for additional photos and more information


This machine available from Westbrook Engineering
Contact or Phone: Toll Free (800) 899-8182 Local (586) 759-3100
about this machinery item -- or any other machine you need.
www.westbrook-eng.com

  AMDA HOME  

© 2003- American Machinery Dealers Association   @   www.amda.org
23501 Mound Road, Warren, MI 48091-2048